1、Wavelength for 12MHz frequency signal is____
2、Name 2 important considerations for car radio performance related to audio signal processing under multipath condition?
3、Name 3 Vehicle Buses.
4、Name 2 possible sources of Electromagnetic interference on Electronics Circuit ASM.
5、What is the typical FM receiver RF signal strength to achieve 30dB S/N for car radio?
6、When a radio is tuned to 98.1 MHz & with a LO of 108.8 MHz, what is the image frequency?
7、For a system with a matched impedance, what is the Reflection Coefficient and SWR?
8、A linear regulator op*(没抄清楚)
Vin(max)=10v,Vout(min)=4.8v,Iout(max)=2.5mA,Iq(max)=2.5mA,Ta(max)=8.5摄氏度，The regulator is available in 3 package has the following thermal characteristics:
Package Rja(摄食度/W) Rjc(摄食度/W)
TO220 50 35
SO14 125 30
D1P8 100 52
Choose the most suitable package to handle the power dissipation requirement without a heat sink and why.
9、Which property of the output capacitor is the primary cause of Low Drop Out (LDO) regulator loop instability?
a) Equivalent series resistance(ESR)
b) Effective series inductance(ESL)
c) Capacitance value
d) Dielectric material
10、The switching regulator is capable of:
a) Higher power conversion efficiency
b) Providing an output voltage that is higher than the input
c) Generating an output boltage oppsite in polarity to the input
d) All of the above